Pallet wood is an excellent choice for a variety of uses. It works particularly well as cladding due to it's thickness, and it's varying tones and hues make it a beautiful wood to use both internally and externally (if treated appropriately).
This pallet wood is new and is therefore great if you're looking for a more uniform appearance across the different pieces. These boards are kiln dried to a moisture content of 6-8%.
This listing is for a "special", kiln dried new board. For new boards which are unsanded or sanded please click back to our Cladding product category. These boards have not been nailed.
Grade: Heat treated (not chemically treated)
Dimensions: See length options above.
Width - 100mm
Thickness - 16mm
Item No: CLPN03
- Flame: The board is machine sanded to give a clean surface and then lightly scorched with a blow torch to highlight the grain. We then a apply a natural colour danish oil to protect the wood.
- Charred: Fully scorched using the Japanese "Shou Sugi Ban" technique of torching the wood with a blow torch to give a rich, darkened appearance. The wood is then meticulously scraped with a wire brush to remove the loose charred pine and reveal a beautiful contrast and texture. We then a apply a natural colour danish oil to protect the wood.
- Coloured: Charred as above, but with an additional coloured stain applied to give a vibrant finish, available in a number of different colours. We then a apply a natural colour danish oil to protect the wood. To choose a colour please add the "Charred - Coloured" item to your basket, then when you view your basket you will see a "Add instructions to seller" option. Please specify the colour here.
--- Available colours - Rustic Red, Midnight Blue, Amber, White Wash and more - please contact us to discuss specific colour request and we will be happy to help.
- For samples please click here.
- Danish Oil (colour - natural): This is a traditional oil which will help to bring out the natural grain of the wood whilst giving it a satin/gloss sheen.
- For samples please click here.
Shipping is calculated at checkout. To see an estimate for shipping, please add the required items to your basket, view your basket, then click "Get shipping estimates". You are also welcome to collect from our Frome (Somerset) shop for no charge, this option is available at checkout.
- These boards are kiln dried and therefore have a low moisture content.
- With new pallet wood there is usually one "good" face, and the opposite face may be slightly chamfered due to the way the timber is cut.
- The photos are a good representation of what you will receive but each board will be slightly different to the next.
- The colour will also vary according to the screen it is displayed on.
We do not charge any extra to cut a board to a particular length. To make use of this service please add to your basket the next larger size of board to the size you require, for example if you would like a 55cm length board and an 82cm length board please add one 60cm board and one 90cm board.
We do charge for rip cuts to a particular width, at £1 per foot (30cm). For example, to rip a 120cm (4ft) board from 100mm wide to 75mm width, the cost would be £4 for this service. You can add this to your order by adding the Rip Cut product below - you will initially only be able to add 1 at £1, but when you go to your basket you can adjust the quantity accordingly (in the above example you would change the quantity to 4). Don't worry - if you choose too many or too few then we can always edit the order for you and credit/invoice for the balance.
You can then let us know the custom sizes you require at the basket stage. When you view your basket you should see an option to "Add instructions for seller" - please click on this and specify the required sizes. We'll see this note on your order and cut accordingly.