Scaffold Board Shelf Bracket - Half Size

The Bracket

This bracket is half size, i.e. to fit a 110mm width shelf (narrower than standard scaffold board). For a full size bracket please see here.

These Scaffold Board Shelf Brackets are the ideal partner to a half width shelf and are the one we use with our Half Scaff Shelf Kit. Their industrial charm lends itself perfectly to the ruggedness of the board and gives a sturdy support for the shelf and it's contents.

The brackets are available not only in the classic "raw steel" look, but also in a range of exciting colours. Try one of our scorched shelves with a black bracket for a classy pairing, or why not go a little more funky with a Coloured Board in blue and contrast with a yellow bracket?? Just make sure to have us rip the board down to the 110mm width for this bracket or simply choose our full size bracket instead.

This bracket is designed specifically to fit a 110mm Scaffold Board and would usually be used as a pair on most lengths of board, although you may wish to use a set of three or even four on larger sizes (see recommendations below). 

Item Specifications

Sold individually (i.e. add a quantity of 2 to make a pair).
Available in either a "hanging" or "propped" option. Includes a set of wall plugs and screws.

Material: Steel
Dimensions: 30mm
Colours: Raw steel, copper, brass, black, white, yellow, or blue. Other colours available on request
Please note: The wall plugs may not be suitable for all wall types. Please make sure to use a plug suitable for your wall or contact us for advice if unsure.
Item No: A01

How many brackets are needed?

There's no hard and fast rule for how many brackets you will require for each shelf - it depends on the type of wall they're going in to and what you plan to put on them. However, we've made a guide of what we consider to be the minimum required.

Shelf Size - Quantity of brackets:
30-150cm (1-5ft) - 2 brackets
180-270cm (6-9ft) - 3 brackets
300-390cm (10-13ft) - 4 brackets