Double Jointed New Kiln Dried Scaffold Boards - All Lengths - 440mm Width - SANDED

This listing is for a sanded new board, kiln dried, up to 2x width (jointed). For unsanded or styled new boards, please click back to our New Scaffold Boards product category. Brackets not included with this listing.

Grade:
- Not BS graded. Not to be used in scaffolding.
Material:
- Wood (pine or European whitewood)
Dimensions (approx):
- Up to 440mm wide, 38-40mm thick, length as per options above
Joint:
- The joint will always be central to the requested width, unless you specify differently.
End bands:
- De-banded
Item No:
- NKJ02

A jointed board is one where two boards have been joined together to create a wider, single board. A standard board is 225mm width so this allows a board to be created with a width of 440mm, once an allowance is made for the cuts. The boards are "biscuited" and glued together, creating a very strong join between the two individual boards. Custom widths and lengths available (see below). The join will always be central to the requested width, unless you specify differently.

Sanding options

- Light (hand) sand: We give the board a light sand by hand. This takes out any lumps and bumps and leaves the board smoother than when it is unfinished. All hard edges are also smoothed off.
- Full (machine) sand: The board is drum sanded, which takes out any un-evenness and makes the board more uniform in appearance and thickness. This makes it more suitable for furniture making.
- Please be aware that machine sanded boards, when oiled, will often finish a lighter shade than an equivalent hand sanded board. This is due to the the machine sanding process removing more of the dark outer part of the board, and also because it closes the grain more which means less oil is absorbed. If unsure, please do order a sample of each.

Oil options

We use Danish Oil, a traditional oil which is perfect for bringing out the natural grain of the wood whilst leaving a durable, satin finish. This is available in three colour options:
- Natural (light)
- Antique (medium)
- Jacobean Oak (dark)

We generally recommend ordering a sample so that you can make sure your preferred oil option is right for you.

We do not charge any extra to cut a board to a particular length. To make use of this service please add to your basket the next larger size of board to the size you require, for example if you would like a 55cm length board and an 82cm length board please add one 60cm board and one 90cm board.

We do charge for rip cuts to a particular width, at £1 per foot (30cm). For example, to rip a 300cm (10ft) board from 225mm wide to 180mm width, the cost would be £10 for this service. You can add this to your order by adding the Rip Cut product below - you will initially only be able to add 1 at £1, but when you go to your basket you can adjust the quantity accordingly (in the above example you would change the quantity to 10). Don't worry - if you choose too many or too few then we can always edit the order for you and credit/invoice for the balance.

You can then let us know the custom sizes you require at the basket stage. When you view your basket you should see an option to "Add instructions for seller" - please click on this and specify the required sizes. We'll see this note on your order and cut accordingly.