New Pallet Wood Cladding - 100mm width - SPECIAL

This listing is for a "special" new board. For new boards which are unsanded or sanded please click back to our Cladding product category. These boards have not been nailed.

Grade:
- Heat treated (not chemically treated)
Material:
- Wood
Dimensions (approx):
- See length options above.
- Width - 100mm
- Thickness - 16mm
Item No:
- CLP03

Style

- Flame: The board is machine sanded to give a clean surface and then lightly scorched with a blow torch to highlight the grain. We then a apply a natural colour danish oil to protect the wood.
- Charred: Fully scorched using the Japanese "Shou Sugi Ban" technique of torching the wood with a blow torch to give a rich, darkened appearance. The wood is then meticulously scraped with a wire brush to remove the loose charred pine and reveal a beautiful contrast and texture. We then a apply a natural colour danish oil to protect the wood.
- Coloured: Charred as above, but with an additional coloured stain applied to give a vibrant finish, available in a number of different colours. We then a apply a natural colour danish oil to protect the wood. To choose a colour please add the "Charred - Coloured" item to your basket, then when you view your basket you will see a "Add instructions to seller" option. Please specify the colour here.
--- Available colours - Rustic Red, Midnight Blue, Amber, White Wash and more - please contact us to discuss specific colour request and we will be happy to help.

Oil options

- Danish Oil (colour - natural): This is a traditional oil which will help to bring out the natural grain of the wood whilst giving it a satin sheen.

We generally recommend ordering a sample so that you can make sure your preferred oil option is right for you.

We do not charge any extra to cut a board to a particular length. To make use of this service please add to your basket the next larger size of board to the size you require, for example if you would like a 55cm length board and an 82cm length board please add one 60cm board and one 90cm board.

We do charge for rip cuts to a particular width, at £1 per foot (30cm). For example, to rip a 300cm (10ft) board from 225mm wide to 180mm width, the cost would be £10 for this service. You can add this to your order by adding the Rip Cut product below - you will initially only be able to add 1 at £1, but when you go to your basket you can adjust the quantity accordingly (in the above example you would change the quantity to 10). Don't worry - if you choose too many or too few then we can always edit the order for you and credit/invoice for the balance.

You can then let us know the custom sizes you require at the basket stage. When you view your basket you should see an option to "Add instructions for seller" - please click on this and specify the required sizes. We'll see this note on your order and cut accordingly.