Reclaimed Scaffold Board Cladding - All sizes - SANDED

This listing is for a sanded reclaimed board with two sanding options and three oiling options available (see below). For unsanded or styled reclaimed boards, or other types of cladding, please click back to our Cladding product category.

Grade:
- British Standard, kite-marked (highest grade available)
Material:
- Wood (pine or European whitewood)
Dimensions (approx):
- 225mm wide, 38mm thick, length as per options above
Item No:
- CL02

Sanding options

- Light (hand) sand: We give the board a light sand by hand. This takes out any lumps and bumps and leaves the board smoother than when it is unfinished. All hard edges are also smoothed off.
- Full (machine) sand: The board is drum sanded, which takes out any un-evenness and makes the board more uniform in appearance and thickness. It will still retain many of the characteristic dents and splits which make a reclaimed board what it is, but make it more suitable for furniture making.
- Please be aware that machine sanded boards, when oiled, will often finish a lighter shade than an equivalent hand sanded board. This is due to the the machine sanding process removing more of the dark outer part of the board, and also because it closes the grain more which means less oil is absorbed. If unsure, please do order a sample of each.

Oil options

We use Danish Oil, a traditional oil which is perfect for bringing out the natural grain of the wood whilst leaving a durable, satin finish. This is available in three colour options:
- Natural (light)
- Antique (medium)
- Jacobean Oak (dark)

We generally recommend ordering a sample so that you can make sure your preferred oil option is right for you.

We do not charge any extra to cut a board to a particular length. To make use of this service please add to your basket the next larger size of board to the size you require, for example if you would like a 55cm length board and an 82cm length board please add one 60cm board and one 90cm board.

We do charge for rip cuts to a particular width, at £1 per foot (30cm). For example, to rip a 300cm (10ft) board from 225mm wide to 180mm width, the cost would be £10 for this service. You can add this to your order by adding the Rip Cut product below - you will initially only be able to add 1 at £1, but when you go to your basket you can adjust the quantity accordingly (in the above example you would change the quantity to 10). Don't worry - if you choose too many or too few then we can always edit the order for you and credit/invoice for the balance.

You can then let us know the custom sizes you require at the basket stage. When you view your basket you should see an option to "Add instructions for seller" - please click on this and specify the required sizes. We'll see this note on your order and cut accordingly.