Reclaimed and New Standard Scaffold Board - SAMPLE

This listing is for one sample piece, with various sanding and finishing options available (see below). The sample piece is not a full width piece and is instead a sample block smaller than a 1ft board (our smallest standard size), to give an idea of the timber, thickness, and finish. For a larger sample, we advise ordering our 1ft board in the corresponding new/reclaimed option. For full boards, please see our Reclaimed Scaffold Boards or New Scaffold Boards product categories.

Grade:
- British Standard, kite-marked (highest grade available)
Material:
- Wood (pine or European whitewood)
Dimensions (approx):
- 38mm thick
Item No:
- S01

Sanding options

- Light (hand) sand: We give the board a light sand by hand. This takes out any lumps and bumps and leaves the board smoother than when it is unfinished. All hard edges are also smoothed off.
- Full (machine) sand: The board is drum sanded, which takes out any un-evenness and makes the board more uniform in appearance and thickness. It will still retain many of the characteristic dents and splits which make a reclaimed board what it is, but make it more suitable for furniture making.

Oil options

We use Danish Oil, a traditional oil which is perfect for bringing out the natural grain of the wood whilst leaving a durable, satin finish. This is available in three colour options:
- Natural (light)
- Antique (medium)
- Jacobean Oak (dark)

Style

- Flame: The board is machine sanded to give a clean surface and then lightly scorched with a blow torch to highlight the grain. We then a apply a natural colour danish oil to protect the wood.
- Charred: Fully scorched using the Japanese "Shou Sugi Ban" technique of torching the wood with a blow torch to give a rich, darkened appearance. The wood is then meticulously scraped with a wire brush to remove the loose charred pine and reveal a beautiful contrast and texture. We then a apply a natural colour danish oil to protect the wood.
- Coloured: Charred as above, but with an additional coloured stain applied to give a vibrant finish, available in a number of different colours. We then a apply a natural colour danish oil to protect the wood. To choose a colour please add the "Charred - Coloured" item to your basket, then when you view your basket you will see a "Add instructions to seller" option. Please specify the colour here.
--- Available colours - Rustic Red, Midnight Blue, Amber, White Wash and more - please contact us to discuss specific colour request and we will be happy to help.

We do not charge any extra to cut a board to a particular length. To make use of this service please add to your basket the next larger size of board to the size you require, for example if you would like a 55cm length board and an 82cm length board please add one 60cm board and one 90cm board.

We do charge for rip cuts to a particular width, at £1 per foot (30cm). For example, to rip a 300cm (10ft) board from 225mm wide to 180mm width, the cost would be £10 for this service. You can add this to your order by adding the Rip Cut product below - you will initially only be able to add 1 at £1, but when you go to your basket you can adjust the quantity accordingly (in the above example you would change the quantity to 10). Don't worry - if you choose too many or too few then we can always edit the order for you and credit/invoice for the balance.

You can then let us know the custom sizes you require at the basket stage. When you view your basket you should see an option to "Add instructions for seller" - please click on this and specify the required sizes. We'll see this note on your order and cut accordingly.